PROWEDGE 210™

ISP Technologies ProWedge™ 210 is a very high output powered monitor at home on the loudest stages, but providing accurate, detailed reproduction. It uses the latest design in neo drivers for low distortion and high output. It comes within 2dB of peak output of the ProWedge™ 212, while providing a lighter, more compact package. It also provides slightly smoother midrange response at the extremes of its coverage angles when compared to a 2 x 12 wedge. The built-in processing and 3 channel DAA™ amplifier allows for extremely easy use, just provide a line-level signal and power. A 60 x 60 degree constant directivity horn pattern and use of dual woofers results in controlled dispersion to reduce bleed into adjacent performers spaces, yet reduces the extreme beaming of important high frequency information found on competing wedges. The Sleek, modern design can actually be used in 4 different positions: Normal position with a 40 degree baffle tilt, ‘Longer-throw’ position with a 50 degree baffle tilt, front-fill position with a vertical baffle orientation, or side-fill position standing on end on top of a sub. XLR signal and Powercon™ connectors are recessed on the side, with ‘thru’ outputs for connection to multiple wedges. The woofer cones are fully waterproofed to survive the elements and abuse. A reinforced, foam-backed, curved grille provides further protection. The Baltic birch plywood box is coated with a tough polyurethane finish for durability. Very high output stage monitor 2-way powered design Sleek look with curved steel grille Dual 10 inch LF drivers with neo magnets and waterproof cones 1.4” throat compression driver covers the upper midrange and high frequency band for stunning clarity and dynamics Internal three channel DAA™ amplification with built-in electronic crossover Made with Baltic Birch

Specifications

Configuration: 2-way LF Drivers: 2 x 10 inch, very high sensitivity, neo magnet, demodulation ring for low distortion, water resistant cones HF Drivers: 1 x 2.6 inch compression, 1.4 inch throat, neo magnet, polymer diaphragm, horn loaded Coverage: 60 V x 60 H Frequency Resp: 65 Hz to 16 KHz Construction: Baltic Birch Plywood Dimensions: 23” W x 16” H x 19” D Weight: 65 lbs. Amplifier: 1000 W RMS, 2000 W Peak 3 channels, high current DAA, fan cooled Power Required: 5.5 Amps x 120 VAC Power Connections: Powercon Input, Powercon Thru Crossover: built-in line-level electronic, 1 kHz nominal, 4th order Crossover: built-in line-level electronic, 1 kHz nominal, 4th order Audio connections: Female XLR input, Male XLR thru. Electronically balanced, 20K ohm differential between pins 2 and 3. Pin 2 hot. System Capabilities Maximum Peak SPL: 133 dB @ 1 meter

Authorized Pro Audio Dealers

Looking for the best place to purchase Pro Audio Gear? Look no further than our trusted network of authorized dealers. Our dealers are carefully selected to provide you with the highest level of customer service and expertise in all things audio.


When you purchase from an authorized dealer, you can be confident that you're getting a genuine Pro Audio Gear product, backed by our industry-leading warranty. Plus, our dealers offer a wide range of services, from setup and installation to training and support, to help you get the most out of your gear.


To find an authorized Pro Audio Gear dealer near you, simply enter your location below. Whether you're looking for speakers, microphones, mixers, or other audio equipment, our dealers have the knowledge and experience to help you unlock your ultimate sound potential. Shop with confidence and get ready to take your performance to the next level.

Find a Dealer

Artist Spotlight

Michael Sweet

THETA DSP MSX

MICHAEL SWEET THETA PRO DSP

Share by: